How To Flash / Install Firmware Lenovo A7000.

Flash / Install Firmware Lenovo A7000. (This guide just for Lenovo A7000) flashtooldownload on this guide will explain to you how to flashing android device on Lenovo A7000 with easy and simple step. Flashing in android is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failde to install Stock ROM Mod. 

Do you know what is bootloop, Ok.. now I will explain to you what si bootloop. Some people say that bootloop is a problem that occured on an android system which the android system could not start up going to the homescreen menu. And it's happened is automatically return to the initial state on the first time when you turn on the Lenovo A7000. And the device will stop to display on the smartphone logo.

Now, follow the isntruction list bellow, do it with your own risk.

Prepare Flash Lenovo A7000.

1. Firmware Lenovo A7000: Download
• 
  
2. Latest Version of flash tool : Download
• 
  
3. Lenovo A7000 USB Driver : Download 
• 
  
4. To ensure what is firmware used by your device, you can check by go to Setting ->About -> Software Information ->Build Number.

Flashing Lenovo A7000.

1. At the first time, please Install driver for Lenovo A7000 that already downloaded before. 
2. Extract the other downloaded file (firmware and flash tool) save in anywhere on your hard drive.
3. Then remove your back case, battery, sim card and SD Card  if installed
4. Next, Connect your Lenovo A7000 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
5. Then, release USB data cable from the PC.
6. Open SP flash tool software and click scatter load. find Lenovo A7000 scatter storage location earlier.
7. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt 

   

   Flash / Install Firmware Lenovo A7000.

8. Then you click options ->Download -> then check DA DL all with checksum.

   

   Flash / Install Firmware Lenovo A7000.

9. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

   

   Flash / Install Firmware Lenovo A7000.

10. Then, click download button on top right and connect your Lenovo A7000 with USB cable in phone switch off position.
    
    

    

    Flash / Install Firmware Lenovo A7000.

11. Process will run automatic, and you can see the red stripe showing download percentage at bellow
12. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Lenovo A7000.

13. Now disconnect your Lenovo A7000
14. Intall you battery again. 
15. Then, start your Lenovo A7000. (remember, on the first booting it will take a long time to start)
16. Success. enjoy

Download Firmware Lenovo A7000.